China best Industrial Silent/Mute Medical Dry Oil Free Air Compressor arb air compressor

Product Description

Detailed Photos

Petroleum, Chemical, Gas and Oil Free Air Compressor

Description&Advantages

Product Descriptions:
The air compressors manufactured by ASC Compressor Factory are oil-free lubrication reciprocating piston compressors developed in collaboration with the German company CHINAMFG DEMAG. These models are known for their low energy consumption, minimal noise, reduced vibration, high reliability, and easy operation.

Each unit primarily consists of the compressor mainframe, electric motor, common base frame, air system, cooling system, lubrication system, instrument control system, drainage system, and electrical system. All components are generally installed on a single common base frame, which is then mounted on a concrete foundation, making it a fixed-type gas station. The connections between the equipment and the fixing points to the base are detachable, making transportation, installation, operation, and maintenance extremely convenient.

As a specialty gas compressor, this model can also compress gases like helium, natural gas, LPG, associated petroleum gas, hydrogen, argon, ethylene, propylene, propane, chloromethane, chloroethane, ethylene oxide, perfluoroethane, carbon monoxide, ammonia, dimethyl ether, carbon dioxide, and coal gas. It’s widely used in industries like petroleum, chemical, fertilizer, metallurgy, industrial gases, fuel gas, food, and more.

Advantages:
Our products, incorporating technology from Germany’s CHINAMFG Demag companies, exhibit high reliability.  Wearable parts like gas valves and piston rings use products from Austria’s Hoerbiger company, with a lifespan exceeding 8000 hours. The system supports soft starting, allowing frequent start and stop cycles for the compressor.   It features a wide intake range for broad adaptability. The overall skid-mounted structure results in low noise and is easy to install in urban areas, leading to investment savings.
It is equipped with a CHINAMFG PLC control system for high automation, ABB soft start (or variable frequency), and features automatic shutdown with audible and visual alarms in case of faults

Product Parameters

Model Flow m3/h Inlet Pressure
(Mpa)
Outlet Pressure
(Mpa)
Weight
(Kg)
Power
(Kw)
VW-6/16-24 360 1.6 2.4 2600 110
VW-6/(0-1.62)-(5-21) 360 0-0.162 0.5-2.1 2350 75
WW-26.7/0.5-10 1602 0.05 1 4500 250
DW-2/0.2-16 120 0.02 1.6 1500 22
WW-3/8 180 normal pressure 0.8 1500 22
2VW-50/3.5 3000 normal pressure 0.35 6000 220
2VW-16.7/0.5-20 1002 0.05 2 6500 185
ZW-0.6/6-10 36 0.6 1 760 5.5
ZW-0.8/12 48 normal pressure 1.2 1200 7.5
DW-9.5/7 570 normal pressure 0.7 2600 55
VW-4.5/0.5-10 270 0.05 1 2100 37
2VW-25/25 1500 normal pressure 2.5 2100 250
2VW-50/3.5 3000 normal pressure 0.35 6000 220
DW-4.5/0.5-13 270 0.05 1.3 2500 18.5
ZW-0.46/(5-10)-(15-20) 27.6 0.5-1.0 1.5-2.0 850 11
VW-5.6/(1.5-2)-25 27.6 0.15-0.2 2.5 2000 55
V-6.5/(1-3)-7 390 0.1-0.3 0.7 1900 37
WW-2.5/3-250 150 0.3 25 3500 110

Our Factory

 

Part of Customer Visit

 

Certifications & Testing

 

Related Product

 

FAQ

Q:Are you a factory?

A:Yes, we are indeed a factory. We specialize in manufacturing high-quality Air/Gas Compressors and are proud to be a primary source for these products.

Q:How long is your delivery time?
A:It varies depending on the specific situation. For our standard configuration compressors, the delivery time is around 30 days. For customized compressors, it usually takes about 30-45 days.

Q:What technical support do you offer?
A:We offer comprehensive technical support to our clients, including remote assistance for installation and commissioning processes. Additionally, we have a team of seasoned engineers ready to be deployed to international client locations for meticulous on-site debugging, installation, and post-installation services.

Q:What is your warranty period?
A:Our warranty policy is valid for a period of 18 months from the date of commissioning at the end customer’s site or 21 months from the date of receipt by the purchaser, whichever comes first. This comprehensive coverage is designed to ensure total customer satisfaction and the reliability of our products

Q:How do you package the compressors?
A:For smaller compressors, we utilize robust plywood boxes that conform to export specifications.
    For the larger units, we strategically place them in freight containers, implementing secure fastening methods to safeguard            against any potential damage during the shipping process.

Q:What are your payment terms?
A:Usually, the payment is made by T/T with a 30% down payment CHINAMFG confirmation of the Proforma Invoice (PI), and the balance is to be paid after inspection and before shipment. We accept both TT and L/C at sight.

Send message  Get product Offer & Brochure!!!

 ↓↓↓

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Local Teams
Warranty: 18 Months
Lubrication Style: Customized
Cooling System: Air Cooling/Water Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Cylinder Position: Customized
Samples:
US$ 40000/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

What Are the Downsides of Using Oil-Free Air Compressors?

While oil-free air compressors offer numerous advantages, there are also some downsides to consider. Understanding these drawbacks is important when evaluating the suitability of oil-free compressors for specific applications. Here’s a detailed explanation of the downsides of using oil-free air compressors:

1. Higher Initial Cost:

Oil-free air compressors generally have a higher initial cost compared to oil-lubricated compressors. The design and technology used in oil-free compressors, such as specialized coatings, precision manufacturing, and advanced filtration systems, contribute to their higher price tag. This can be a significant factor for budget-conscious buyers or for applications where cost is a primary consideration. However, it’s important to weigh the initial cost against the long-term benefits and potential cost savings in terms of maintenance, energy efficiency, and reduced risk of oil contamination.

2. Reduced Durability:

Oil-free compressors may have slightly reduced durability compared to oil-lubricated compressors. The absence of oil for lubrication can result in increased wear on certain components, such as piston rings, valves, and bearings. However, modern advancements in materials and engineering have significantly improved the durability and lifespan of oil-free compressors. With proper maintenance and adherence to recommended operating conditions, oil-free compressors can still provide reliable performance over an extended period.

3. Higher Energy Consumption:

Oil-free air compressors typically have higher energy consumption compared to oil-lubricated compressors. The absence of oil for lubrication increases friction within the compressor, requiring more energy to overcome this resistance. However, advancements in compressor design, such as improved air ends, energy-efficient motors, and variable speed drives, have helped minimize this energy consumption gap. Additionally, the potential energy savings from eliminating the need for oil changes and reducing the risk of pressure drops due to oil contamination can offset the higher energy consumption over the compressor’s lifetime.

4. Limited Cooling Capacity:

Oil-free compressors may have limited cooling capacity compared to oil-lubricated compressors. Oil acts as a lubricant and coolant in oil-lubricated compressors, effectively dissipating heat generated during compression. In contrast, oil-free compressors rely on other cooling mechanisms, such as air or water cooling, which may have limitations in handling high heat loads. This can be a consideration for applications that require continuous or high-duty cycle operation in elevated ambient temperatures. Adequate cooling systems and proper monitoring of temperature limits are necessary to prevent overheating and ensure optimal performance of oil-free compressors.

5. Noisy Operation:

Oil-free air compressors are generally noisier compared to oil-lubricated compressors. The absence of lubricating oil can result in increased noise levels due to direct metal-to-metal contact between rotating and reciprocating parts. However, advancements in noise reduction technologies and sound insulation materials have helped mitigate this issue to some extent. Additionally, the noise level can vary between different models and brands of oil-free compressors, so it’s important to consider the specific noise requirements of the application and select a compressor that meets those criteria.

Despite these downsides, oil-free air compressors have become increasingly popular and widely used in various industries due to their advantages in providing clean, oil-free compressed air. It’s important to assess the specific requirements of the application, consider the trade-offs, and consult with compressed air experts to determine whether an oil-free compressor is the most suitable choice.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

What Industries Commonly Use Oil-Free Air Compressors?

Oil-free air compressors are utilized in various industries where clean and oil-free compressed air is essential for specific applications. These industries rely on oil-free compressors to ensure product quality, maintain equipment integrity, and meet industry regulations. Here’s a detailed explanation of the industries commonly using oil-free air compressors:

1. Food and Beverage:

The food and beverage industry extensively employs oil-free air compressors. These compressors are used in processes such as food packaging, filling, bottling, and product drying. Oil-free compressors prevent oil contamination, ensuring product quality, food safety, and compliance with industry regulations. They help maintain the freshness of food products, prevent flavor or odor contamination, and minimize the risk of product spoilage.

2. Pharmaceutical and Healthcare:

In the pharmaceutical and healthcare sectors, oil-free air compressors are vital for maintaining the purity and integrity of medical gases, powering respiratory devices, and supporting laboratory applications. Oil-free compressors deliver clean and uncontaminated compressed air for critical processes, such as ventilators, nebulizers, surgical instruments, dental tools, and laboratory testing. They ensure patient safety, regulatory compliance, and reliable operation in these sensitive environments.

3. Electronics and Semiconductor:

The electronics and semiconductor industries require oil-free air compressors for various applications. These compressors are used in cleanrooms and manufacturing processes where air quality is crucial to prevent contamination of sensitive electronic components. Oil-free compressors provide clean and dry compressed air for applications like chip manufacturing, circuit board assembly, and air knife systems. They help ensure the reliability and quality of electronic products while minimizing the risk of particle contamination.

4. Automotive and Aerospace:

In the automotive and aerospace industries, oil-free air compressors are utilized for painting, coating, and pneumatic tools. These compressors deliver clean, oil-free compressed air, ensuring high-quality finishes and preventing oil contamination that could affect adhesion or cause defects. Oil-free compressors play a critical role in maintaining the precision and reliability of pneumatic tools used in assembly lines, manufacturing processes, and aircraft maintenance.

5. Textile and Garment:

The textile and garment industries rely on oil-free air compressors for various applications, including powering pneumatic tools, air agitation in dyeing processes, and providing clean compressed air for textile manufacturing. Oil-free compressors prevent oil contamination that could stain or damage fabrics, ensuring product quality and minimizing the risk of production defects. They help maintain efficiency and reliability in textile production while meeting strict quality standards.

6. Chemical and Petrochemical:

The chemical and petrochemical industries utilize oil-free air compressors in critical processes where air purity is essential. These compressors are used in applications such as air sparging, pneumatic conveying, and instrument air supply. Oil-free compressors ensure that the compressed air does not introduce contaminants, ensuring the integrity of chemical reactions, preventing product contamination, and maintaining the safety of equipment and personnel.

7. Research and Laboratories:

Research facilities and laboratories across various industries rely on oil-free air compressors for a wide range of applications. These include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressors provide clean and reliable compressed air, ensuring accurate test results, preventing contamination, and maintaining the integrity of samples and experiments.

It’s important to note that while these industries commonly use oil-free air compressors, the specific requirements may vary based on the application and industry standards. Selecting the appropriate oil-free compressor and adhering to recommended maintenance practices are crucial to achieve optimal performance and meet industry-specific needs.

China best Industrial Silent/Mute Medical Dry Oil Free Air Compressor   arb air compressorChina best Industrial Silent/Mute Medical Dry Oil Free Air Compressor   arb air compressor
editor by CX 2024-02-26