China OEM Gdg09-a 9L Medical Equipment Silent Compressor Oil Free Air Compressor 12v air compressor

Product Description

Specification

                                                                                                        Oil Free & Slient Air Compressor
Model  GDG09-A
Electric Motor  550W/0.75HP
Voltage  220V/110V,single phase
Frequency  50Hz/60Hz
Tank  9L
Pressure  8BAR/115PSI
Capacity  50L/min/1.8CFM
Speed  1480RPM/1700RPM
Piston Diameter x Qty.  Ø63.7mm*2pcs
Gross Weight  17kg
L*W*H  555*225*485mm

Picture

Main Feature

1. The output pressure is stable without fluctuation, maximum limit reduces noise pollution. Suitable for the analysis of testing, laboratory equipment, laboratory, University Research Institute, environmental protection, health and epidemic prevention inspection department.

2. No oil
The output of the gas oil phenomenon, because it will not add lubricating oil. And with the water outlet, so as to be able to timely discharge of water accumulation gas tank.

3. Steady flow
Using the new section pressure device, air output constant current constant voltage, the atomic absorption laboratory instrument repeatability in testing.

4. Long service life
Increasing the starting preheating device, the machine is equipped with an external protector, inner pot after spraying processing, not only the rational use of the air compressor, and strong versatility, long service life.

5. Simple operation
Omit the oil machine and screw air compressor often check add lubricating oil worries, regular maintenance time is long, the daily transmission can be normal operation. Simple operation, no duty.

Certificate
            
         

Packing

Outer packing is honey-comb carton with belts,inner packing is a transparent bag.We could accept customers special request,such as:print brand,specification,good’s picture.
            

Brief introduction

HangZhou City Ouye(Guangda) Electromechanical Co.,Ltd: specializes in screw and piston air compressors;-such as:permanent magnet frequency conversion screw type, belt driven air compressor,direct driven air compressor,oil free air compressor,gasoline air compressor and diesel air compressor.cutting machines;sitting board machines;air compressor pumps;access series and so on.

We introduce domestic and overseas advanced technology to make high-quality products.Our products have been sold to the United States, UK,Poland, Brazil,Russia, South Korea, Australia,Chile,Argentina,Dubai,Banglandesh,Turkey,Moldova,and so on .They have a good reputation at home and abroad. We are both professional manufacturer and exporter , so our products are high quality with competitive price.

  

Frequency Asked Question

1.Are you the manufacturer or trading company?
We are the manufacturer.

2.Where is your factory?
It is located in HangZhou City,ZHangZhoug Province,China.

3.What’s the terms of trade?
FOB,CFR,CIF or EXW are all acceptable.

4.What’s the terms of payment?
T/T,L/C at sight or cash.

5.What’s the lead time?
About 25 days after receiving the deposit on our bank account.

6.Do you accept sample order?
Yes,we accept.

7.What about the cost of sample?
 You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1×40’HQ container in the future.

We are looking CHINAMFG to establishing long-term business relationships with your esteemed company!

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: 1 Year
Logo and Sticker: Customized
Color: Any Color Is Available
Sample Order: Accept
Type: Piston,Oil Free,Silent
Configuration: Portable
Customization:
Available

|

air compressor

How Do You Ensure the Air Quality Produced by Oil-Free Compressors?

Ensuring the air quality produced by oil-free compressors involves a combination of factors, including proper equipment selection, appropriate maintenance practices, and adherence to industry standards. Here’s a detailed explanation of how to ensure the air quality produced by oil-free compressors:

1. Equipment Selection:

Choosing the right oil-free compressor is the first step in ensuring air quality. It is essential to select a compressor that is specifically designed for applications requiring clean air, such as food and beverage processing, pharmaceutical manufacturing, electronics assembly, and medical facilities. Consideration should be given to the compressor’s filtration capabilities, air treatment options, and compliance with relevant industry standards and regulations.

2. Filtration Systems:

The filtration systems integrated into oil-free compressors play a crucial role in maintaining air quality. These systems typically include pre-filters, coalescing filters, and activated carbon filters. Pre-filters remove larger particles, coalescing filters capture smaller particles and coalesce water vapor, and activated carbon filters absorb odors and remaining oil vapors. Regular inspection and replacement of filters are necessary to ensure their effectiveness in removing contaminants from the compressed air.

3. Regular Maintenance:

Regular maintenance is key to preserving air quality. This includes following the manufacturer’s recommended maintenance schedule, which may involve tasks such as filter replacement, lubrication of non-compressed parts, and inspection of seals and gaskets. Proper maintenance helps prevent air leaks, ensures the compressor operates efficiently, and reduces the risk of contamination.

4. Air Quality Testing:

Periodic air quality testing is essential to verify the effectiveness of the oil-free compressor and its filtration system. Air quality testing can involve measuring parameters such as oil content, particulate matter, moisture levels, and microbiological contamination. By conducting regular air quality tests, any deviations from the desired air quality standards can be identified, allowing for corrective actions to be taken promptly.

5. Compliance with Standards:

Adhering to industry standards and regulations is crucial in ensuring air quality. Standards such as ISO 8573 specify the acceptable limits for contaminants in compressed air, including oil content, particulate matter, and moisture. Compressors should be selected, installed, and operated in accordance with these standards. Regular auditing and certification processes can help ensure ongoing compliance and provide assurance of air quality to stakeholders.

6. Training and Education:

Proper training and education of personnel involved in the operation and maintenance of oil-free compressors are vital. Operators should be familiar with the specific requirements of oil-free compressors, including the importance of filtration, maintenance procedures, and recognizing signs of potential issues. Training programs can help ensure that operators have the necessary knowledge and skills to maintain air quality effectively.

By considering equipment selection, implementing robust filtration systems, conducting regular maintenance, performing air quality testing, complying with standards, and providing appropriate training, the air quality produced by oil-free compressors can be effectively ensured. These measures are essential for applications where air purity is critical, safeguarding product integrity, process efficiency, and the health and safety of personnel.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

Can Oil-Free Compressors Be Used in Medical Applications?

Yes, oil-free compressors can be used in medical applications and are widely utilized in various healthcare settings. These compressors provide clean, oil-free compressed air, making them suitable for critical medical processes and equipment. Here’s a detailed explanation of the use of oil-free compressors in medical applications:

1. Surgical Tools and Instrumentation:

Oil-free air compressors are commonly used in surgical suites and operating rooms to power pneumatic surgical tools and instrumentation. Surgical tools, such as pneumatic drills, saws, and shavers, rely on compressed air for their operation. Using oil-free compressors ensures that the compressed air delivered to these tools is free from oil contamination, reducing the risk of oil particles entering the surgical site or interfering with the sterile environment.

2. Respiratory Devices:

In respiratory care, oil-free compressors play a vital role in powering various medical devices, such as ventilators, nebulizers, and continuous positive airway pressure (CPAP) machines. These devices require a clean and reliable source of compressed air to deliver oxygen or medication to patients. Oil-free compressors ensure that the compressed air produced is free from oil, providing safe and effective respiratory support.

3. Dental Equipment:

Oil-free compressors are extensively used in dental offices and clinics to power dental tools and equipment, including dental drills, air syringes, and suction devices. Dental procedures require a high level of precision, and any contamination in the compressed air can compromise patient safety and treatment outcomes. By using oil-free compressors, dental professionals can ensure the delivery of clean, oil-free compressed air for optimal dental care.

4. Laboratory Applications:

Oil-free compressors are employed in various laboratory applications within the medical field. These applications include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressed air is essential in maintaining the integrity of samples, preventing contamination, and ensuring accurate and reliable test results.

5. Pharmaceutical Manufacturing:

In pharmaceutical manufacturing, oil-free compressors are utilized to provide clean compressed air for critical processes. This includes applications such as product drying, powder handling, and packaging. Oil-free compressed air ensures the purity and quality of pharmaceutical products, meeting stringent regulatory requirements and minimizing the risk of contamination.

6. Medical Gas Systems:

Oil-free compressors are an integral part of medical gas systems, which provide essential gases like oxygen, nitrogen, and compressed air throughout healthcare facilities. These gases are used for various medical purposes, such as patient breathing, anesthesia, laboratory testing, and respiratory therapy. Oil-free compressors ensure the delivery of clean and uncontaminated medical gases, maintaining patient safety and the reliability of medical gas systems.

Oil-free compressors offer the necessary features and performance required for critical medical applications. They provide clean, oil-free compressed air, ensuring patient safety, maintaining sterility, and meeting regulatory standards. However, it’s important to select oil-free compressors specifically designed and certified for medical applications and adhere to manufacturer guidelines and maintenance protocols to ensure optimal performance and patient care.

China OEM Gdg09-a 9L Medical Equipment Silent Compressor Oil Free Air Compressor   12v air compressorChina OEM Gdg09-a 9L Medical Equipment Silent Compressor Oil Free Air Compressor   12v air compressor
editor by CX 2024-04-02