China Standard Explosion Proof Low Pressure Oil Free Dry Screw Air Compressor arb air compressor

Product Description

KDS Series Dry Screw Oil Free Compressor is used in all kinds of industries where air quality is important for the end products and production processes.These applications include food and beverage processing, pharmaceutical manufacturing and packaging, chemical and petrochemical processing, semiconductor and electronics manufacturing, the medical sector, automotive paint spraying, textile manufacturing and many more.

Only oil-free air compressors deliver 100% oil-free air, CHINAMFG develop oil-free air compressors especially for applications demanding the highest levels of purity. Zero risk of contamination means zero risk of damaged or unsafe products, or losses due to operational downtime.

Features:

World class oil-free compression element 
1.Unique seal design guarantees 100 % oil-free air
2.Operation far below critical speed
3.High overall efficiency, thanks to: 
 – superior rotor coating
 – element cooling jackets
4.No oil ‘clean up’ problems

SuperCoat – Energy savings and longer life Coating
Adekom’s exclusive SuperCoat rotor and housing coating process uses a mechanical and chemical CHINAMFG to insure the thinnest coating with the tightest possible grip. First, the rotor and housing surfaces are mechanically prepared to accept the coating. Then SuperCoat is precision-applied to insure the most even coat possible. Finally, all surfaces are heat-cured to solidify the mechanical/chemical bond. Compared to other coatings, SuperCoat delivers longer life and energy savings.

Energy Saving Electric Motor 
Highly efficient, totally enclosed fan-cooled (T.E.F.C.), IP55, class F electric motor can achieve high efficiency of 95.2% that brings an unprecedented level of energy saving. High quality high-speed bearings from “SKF” are fitted for continuous trouble-free operation.
Advanced control and monitoring system

Advanced control and monitoring
1.Overall system performance status with pro-active service indications, alarms for malfunctions and safety shutdowns
2.Multi-language selectable display 
3.All monitoring and control functions via 1 interface 
4.Wide communication possibilities 
5.Integration possible in many process control systems (field bus system)

High efficiency+high reliability water cooling
1.corrosion resistant stainless steel tubing 
2.highly reliable robot welding; no risk for leaks 
3.aluminium star insert increases heat transfer 
4.cooling water outside tubes guided by baffles 
no dead zones 
limited fouling 
no degradation in cooler performance 
easy cleaning 
very long service intervals

 

 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type
Customization:
Available

|

air compressor

Can Oil-Free Air Compressors Handle High-Pressure Applications?

Yes, oil-free air compressors are capable of handling high-pressure applications, but certain considerations need to be taken into account. Here’s a detailed explanation of the capabilities and considerations regarding the use of oil-free air compressors in high-pressure applications:

1. Compressor Design:

Oil-free air compressors are designed to deliver oil-free compressed air, and some models are specifically engineered to handle high-pressure requirements. These compressors incorporate robust components, such as high-strength materials, reinforced valves, and advanced sealing technologies, to withstand the higher pressures generated during compression. They are typically designed to operate within specific pressure ranges, and their performance and reliability are optimized for those ranges.

2. Pressure Rating:

When selecting an oil-free air compressor for a high-pressure application, it is crucial to consider the compressor’s pressure rating. The pressure rating indicates the maximum pressure that the compressor can reliably generate and maintain. Oil-free compressors suitable for high-pressure applications are available with varying pressure ratings, ranging from several hundred PSI (pounds per square inch) to several thousand PSI, depending on the specific model and manufacturer. It’s important to choose a compressor with a pressure rating that meets or exceeds the requirements of the intended application.

3. Operating Efficiency:

Operating efficiency is an important consideration when using oil-free air compressors for high-pressure applications. As the pressure requirement increases, the compressor may consume more energy to achieve and maintain the desired pressure. It’s advisable to select a compressor that is optimized for energy efficiency, as it can help reduce operating costs and minimize environmental impact. Compressors equipped with advanced control systems, variable speed drives, and efficient motor designs can enhance overall energy efficiency in high-pressure applications.

4. Air Treatment and Filtration:

High-pressure applications often require dry and clean compressed air. In addition to the oil-free operation, it is important to ensure that the compressed air is adequately treated and filtered to remove moisture, particulates, and other contaminants. The use of appropriate air dryers, filters, and separators in the compressed air system is necessary to maintain the desired air quality and protect downstream equipment in high-pressure applications.

5. System Safety and Regulations:

High-pressure applications present additional safety considerations. It is essential to ensure that the entire compressed air system, including the compressor, storage tanks, piping, and safety devices, is designed, installed, and operated in compliance with relevant safety regulations and standards. Pressure relief valves, pressure gauges, and other safety devices should be appropriately sized and configured to handle the high-pressure conditions. Regular inspections, maintenance, and adherence to safety protocols are crucial to ensure the safe operation of the high-pressure oil-free air compressor system.

It’s important to consult with compressor manufacturers or industry experts to determine the suitability of specific oil-free compressors for high-pressure applications. They can provide guidance on selecting the right compressor model, assessing system requirements, and ensuring compliance with safety standards.

By considering the design, pressure rating, operating efficiency, air treatment, and system safety, oil-free air compressors can successfully handle high-pressure applications in various industries, including manufacturing, automotive, aerospace, and energy.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

What Is an Oil-Free Air Compressor?

An oil-free air compressor, also known as an oilless air compressor, is a type of air compressor that operates without the use of lubricating oil in the compression chamber. Unlike traditional air compressors that rely on oil for lubrication and sealing, oil-free compressors employ alternative methods to achieve compression and deliver clean, oil-free compressed air. Here’s a detailed explanation of how oil-free air compressors work and their key characteristics:

Working Principle:

Oil-free air compressors utilize various techniques to compress air without the need for oil. The most common methods include:

  • Dry Compression: In this method, the compression chamber doesn’t have any oil present. Special materials, coatings, and surface treatments are used to reduce friction and wear between the moving parts, allowing for efficient compression without oil lubrication.
  • Water or Air Cooling: Oil-free compressors often employ advanced cooling mechanisms, such as water or air cooling, to dissipate the heat generated during compression. This helps to maintain the operating temperature within acceptable limits and ensures the longevity of the compressor.
  • Piston Rings and Seals: Instead of relying on oil for lubrication and sealing, oil-free compressors use specialized piston rings, seals, or other forms of dry frictionless technology. These components provide the necessary sealing and reduce internal friction, allowing for efficient compression without the need for oil.

Characteristics of Oil-Free Air Compressors:

1. Clean and Oil-Free Air: The primary advantage of oil-free air compressors is that they deliver air that is free from oil contamination. This makes them suitable for applications where oil contamination can be detrimental, such as in the medical, pharmaceutical, food and beverage, electronics, and automotive industries.

2. Low Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated compressors. Since there is no oil to change or monitor, maintenance tasks related to oil filtration, oil changes, and oil disposal are eliminated. This can result in cost savings and reduced downtime.

3. Compact and Lightweight: Oil-free compressors are often designed to be compact and lightweight, making them portable and easy to transport. This makes them suitable for applications where mobility is required, such as construction sites, workshops, and on-site maintenance tasks.

4. No Oil Contamination Risk: With oil-free compressors, there is no risk of oil contaminating the compressed air system. This eliminates the need for additional filtration or separation equipment to remove oil from the compressed air, simplifying the overall system design.

5. Lower Initial Cost: In general, oil-free compressors tend to have a lower initial cost compared to oil-lubricated compressors. This can be advantageous for applications with budget constraints or when the specific requirements of the application align with the capabilities of oil-free compressors.

It’s important to note that oil-free air compressors may have certain limitations compared to oil-lubricated compressors. They may have lower maximum operating pressures and higher operating temperatures. Additionally, the absence of oil lubrication may result in slightly reduced efficiency and increased wear on certain components over time.

By understanding the working principle and characteristics of oil-free air compressors, users can determine whether this type of compressor is suitable for their specific application and requirements.

China Standard Explosion Proof Low Pressure Oil Free Dry Screw Air Compressor   arb air compressorChina Standard Explosion Proof Low Pressure Oil Free Dry Screw Air Compressor   arb air compressor
editor by CX 2024-01-08